[Robert Akin]

Robert Akin on July 20, 2018 at 8:14 am #18702

Will do. Thank you for your assistance.

[Brenton Haskell]

Brenton Haskell on July 20, 2018 at 4:42 am #18701

Sorry, not sure about that. From the picture on the Sky Geek website it looks like it is the whole wick that screws onto the airframe. Might want to give them a call and ask.
Good luck.

[Robert Akin]

Robert Akin on July 19, 2018 at 6:44 pm #18700

Thanks for reply. Do you know if wick is attached permanently to the frame attachment? Need a wick that will screw into adapter.

[Brenton Haskell]

Brenton Haskell on July 19, 2018 at 2:35 pm #18699

The Piper part number for my PA28R-201T is SW -10-96. Available from Sky Geek at $34.85. Hope this helps…
Brent

[Robert Akin]

Robert Akin on July 6, 2018 at 12:25 pm #18687

Thanks Steve for your help.

[Robert Akin]

Robert Akin on July 6, 2018 at 12:24 pm #18686

Thanks for the reply.

[Mark Gregory]

Mark Gregory on July 5, 2018 at 8:52 pm #18685

I’ve worked with a guy named Keith in Phoenix AZ and he has not let me down yet. As a matter of fact, I’m going up there this Saturday to pick up a nose landing gear. He salvages old aircraft and you never know what he has up his sleeve. His number is 602-468-1500.

[STEVE]

STEVE on July 1, 2018 at 8:01 am #18681

I did a (short) search for the Piper part number for static wicks for your Arrow, and came up with some part numbers but wasn’t able to find a source under those part numbers. (one was 456-787, another 456-907).
A variety of static wicks are available from http://www.AircraftSpruce.com, but I did not find any that cross reference to the Piper part numbers.
I’ve been trying to find whether Piper issued a service kit for the installation of static wicks on an Arrow, but so far have not had any luck.
I also looked at the Arrow parts books I have but did not see any illustration that showed static wick installation.
The static wick I found in the Aircraft Spruce catalog that looks most like the wicks I’m familiar with is part number 11-04154. It is the wick specified by other airframe manufacturers.
The ESD-1 wick is a less expensive wick (Spruce part number is 11-10574) but it’s listed as non certified.
Sorry I can’t help further.
I’ll keep searching.

[Robert Akin]

Robert Akin on June 28, 2018 at 6:45 pm #18678

Need a source to purchase a static wick for Piper Arrow.